Encrypted Channel Issues - Ceton topic

I have been able to get the Ceton card working with the un-encrypted channels with the install of a cable card. I worked with the guys at the cable company and they have turned on their 'premium' channels for me which include most of the basic channels in HD but they are encrypted. I have tested to make sure they are working within windows media center, but I cannot get them to work on Myth. I receive an error that reads 'Could not read first 2048 bytes...' - From reading around I have read that several people have had luck with the encrypted channels and some say that the cable card wasn't 'setup' correctly.

From the Ceton I see that the for example HistoryHD has the copy flag set to 'One copy' rather than 'copy freely' like the clear channels. Also, I can see that myth does change the channel but in the logs I see 'Channel is scrambled, expecting CCI'

Any help from the experts would be greatly appreciated!

[xubuntu] HP G7000 laptop facing a couple of wireless issues topic

Good evening wireless gurus.

Let me start saying that I'm using the "Try Xubuntu" option of today's image on a HP G7000 laptop. This is not a installed system.

My first issue related to the fact that everytime I boot the laptop the wireless button is orange, meaning that my wireless is hard-blocked, and no matter pressing the button will turn it on. The only way I have to turn it on is by rebooting into windows, and once at the windows login, I'm then able to press the button and it will turn on.
I've google this to exhaustion to no avail.

The other issue I'm facing relates to the fact that I'm not getting any wireless networks signals. In fact the network indicator/applet only shows the wired one (and yes the led on the wireless button is blue, meaning it is turned on)/

Here's what I have done so far

Code:

---

sudo apt-get purge bcmwl-kernel-source
sudo apt-get update
sudo apt-get install firmware-b43-installer
sudo modprobe -r b43
sudo modprobe b43

---

But still nothing.


Here's some output I think you might need

Code:

---

xubuntu@xubuntu:~$ grep 'blacklist b43' /etc/modprobe.d/*
xubuntu@xubuntu:~$

xubuntu@xubuntu:~$ lsmod | grep -e b43 -e wl
b43                  398950  0
bcma                  46583  1 b43
mac80211              580709  1 b43
wl                  6148792  0
cfg80211              433826  3 wl,b43,mac80211
ssb                    55983  2 b43,ssb_hcd

xubuntu@xubuntu:~$ dmesg | grep b43
[  29.376722] b43-phy0: Broadcom 4311 WLAN found (core revision 13)
[  29.447340] b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 9
[  29.447358] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0
[  29.466652] b43 ssb0:0: Direct firmware load for b43/ucode13.fw failed with error -2
[  29.466691] b43 ssb0:0: Direct firmware load for b43/ucode13.fw failed with error -2
[  29.466742] b43 ssb0:0: Direct firmware load for b43-open/ucode13.fw failed with error -2
[  29.466761] b43 ssb0:0: Direct firmware load for b43-open/ucode13.fw failed with error -2
[  29.466766] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[  29.466771] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[    29.466775] b43-phy0 ERROR: You must go to  http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and  download the correct firmware for this driver version. Please carefully  read all instructions on this website.
[  813.962368] b43-wlan ERROR: Dual-core devices are not supported
[  813.962382] b43: probe of ssb0:0 failed with error -524
[ 1242.900505] b43-wlan ERROR: Dual-core devices are not supported
[ 1242.900521] b43: probe of ssb0:0 failed with error -524
[ 1498.989014] b43-wlan ERROR: Dual-core devices are not supported
[ 1498.989028] b43: probe of ssb0:0 failed with error -524

xubuntu@xubuntu:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

---

Thanks in advance for all the help.

EDIT: Here's the output obtained by the wireless script -> http://paste.ubuntu.com/10179683/

[lubuntu] Keyboard layout issues: no effect when changing settings in lxkeymap topic

One of the recent updates (~ 1.5 weeks) has totally screwed up my previous keyboard layout.
Still worse, I can't seem to REMOVE what's pre-set in there.

I've always loved the variant to have the ever-useless CAPS LOCK as "Compose" key.
However, by some magic the "shift_caps_toggle" option was added (it was not there before), and now is obviously blocking Caps Lock from working the way I want it!

I've tried everything imaginable to get the "grp:shift_caps_toggle" option removed from the layout, but it just does not work.

Plus, I've tried to grep for this option to be configured anywhere, to no avail.

Though not recommended, I even removed the "shift_caps_toggle" option from ~/.config/lxpanel/Lubuntu/panels/panel, but now look:

Code:

---

andy@andy-lubuntubox:~$ lxkeymap -a
/usr/lib/python2.7/dist-packages/lxkeymap/helpers.py:46: GtkWarning: Unknown property: GtkMenu.ubuntu-local
  builder.add_from_file(ui_filename)
Sections: ['Global']
Layouts: ['us']
Variants: ['', '']
Options: ['grp:shift_caps_toggle']
['Global']
['compose:caps']
Lxkeymap autostart running...

---

Ehh??
Where else does lxkeymap (which is a Python script, by the way) pull that Options line from?
For a moment, I've even thought of a random variable which was not cleared (like in C, when you don't initialize a string variable, it might display some random garbage)

Sometimes lxkeymap recently complains that it is unable to save current settings. Hmmm...

[ubuntu] Ubuntu 14.04 LTS 64-bit wifi issues with RTL8191SEvA topic

Hi, I just installed 14.04 LTS 64-bit on an HP G62 and the wifi keeps dropping.

Attached is the output from the wireless_script.

I tried a few things but I suspect I have the wrong driver. I see the drivers in use don't match the model exactly:

Code:

---

##### lspci #############################

02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller [10ec:8171] (rev 10)
    Subsystem: Hewlett-Packard Company Device [103c:1467]
    Kernel driver in use: rtl8192se

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
    Subsystem: Hewlett-Packard Company Device [103c:1484]
    Kernel driver in use: r8169

---

Many thanks for your help !

Attached Files

• 
  
  wireless-info.tar.gz
  (6.5 KB)
  

Atheros AR93xx: Wifi issues on 14.04 topic

I apologize if this has been asked before and I did find some related posts but none of them got me a solution.
So I built a new desktop and my wifi on 14.04 seems to be really inconsistent (keeps getting disconnected) and slow. I'm dual booting my machine and I consistently get 1/8th of the speed I get on windows.

My network adapter is TP-LINK TL-WDN4800 Dual Band Wireless N900 (Amazon link)

The machine detects the hardware (bolded in last line):

Code:

---


> lspci -nn

00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06)
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06)
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
00:14.0 USB controller [0c03]: Intel Corporation Device [8086:8cb1]
00:16.0 Communication controller [0780]: Intel Corporation Device [8086:8cba]
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2) I218-V [8086:15a1]
00:1a.0 USB controller [0c03]: Intel Corporation Device [8086:8cad]
00:1b.0 Audio device [0403]: Intel Corporation Device [8086:8ca0]
00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:8c90] (rev d0)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d0)
00:1c.7 PCI bridge [0604]: Intel Corporation Device [8086:8c9e] (rev d0)
00:1d.0 USB controller [0c03]: Intel Corporation Device [8086:8ca6]
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:8cc4]
00:1f.2 SATA controller [0106]: Intel Corporation Device [8086:8c82]
00:1f.3 SMBus [0c05]: Intel Corporation Device [8086:8ca2]
03:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge [1b21:1080] (rev 04)
05:00.0 Network controller [0280]: Qualcomm Atheros AR93xx Wireless Network Adapter [168c:0030] (rev 01)

---

Any help much appreciated. Thanks in advance.

[ubuntu_studio] Jack issues topic

Hi, my name is Bobby.. I am having a problem with QjackCtrl... at first it slowed down and eventually stopped playing Clementine altoget.. I noticed it had an insane amt of Xruns... I closed jack and opend Audacious just for some playback.,, it too did the same thing after a few mins.... ever since then I cant get jack to work at all. Here is a copy of the message I get on start up:

Quote:

---

02:42:47.922 Patchbay deactivated.
02:42:47.982 Statistics reset.
02:42:47.995 ALSA connection change.
02:42:48.011 D-BUS: Service is available (org.jackaudio.service aka jackdbus).
Cannot connect to server socket err = No such file or directory
Cannot connect to server socket
jack server is not running or cannot be started
02:42:48.025 ALSA connection graph change.
02:43:03.901 D-BUS: SetParameterValue('driver:inchannels', '2'): Parameter value type mismatch: was expecting 'i', got 'u'. (org.jackaudio.Error.InvalidArgs)
Cannot connect to server socket err = No such file or directory
Cannot connect to server socket
jack server is not running or cannot be started
Sun Feb 8 02:43:03 2015: [1m[31mERROR: Parameter value type mismatch: was expecting 'i', got 'u'[0m
Sun Feb 8 02:43:05 2015: Saving settings to "/home/hellkiller/.config/jack/conf.xml" ...
02:43:08.184 D-BUS: SetParameterValue('driver:outchannels', '2'): Parameter value type mismatch: was expecting 'i', got 'u'. (org.jackaudio.Error.InvalidArgs)
Sun Feb 8 02:43:08 2015: [1m[31mERROR: Parameter value type mismatch: was expecting 'i', got 'u'[0m
02:43:09.562 D-BUS: JACK server is starting...
02:43:09.572 D-BUS: JACK server was started (org.jackaudio.service aka jackdbus).
Sun Feb 8 02:43:09 2015: Starting jack server...
Sun Feb 8 02:43:09 2015: JACK server starting in non-realtime mode
Sun Feb 8 02:43:09 2015: control device hw:0
Sun Feb 8 02:43:09 2015: control device hw:0
Sun Feb 8 02:43:09 2015: Acquired audio card Audio0
Sun Feb 8 02:43:09 2015: creating alsa driver ... hw:0|hw:0|1024|2|44100|0|0|nomon|swmeter|-|32bit
Sun Feb 8 02:43:09 2015: control device hw:0
Sun Feb 8 02:43:09 2015: configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 2 periods
Sun Feb 8 02:43:09 2015: ALSA: final selected sample format for capture: 16bit little-endian
Sun Feb 8 02:43:09 2015: ALSA: use 2 periods for capture
Sun Feb 8 02:43:09 2015: ALSA: final selected sample format for playback: 16bit little-endian
Sun Feb 8 02:43:09 2015: ALSA: use 2 periods for playback
Sun Feb 8 02:43:09 2015: scan: added port hw:0,0,0 in-hw-0-0-0-C-Media-CMI8738-MIDI
Sun Feb 8 02:43:09 2015: scan: added port hw:0,0,0 out-hw-0-0-0-C-Media-CMI8738-MIDI
Sun Feb 8 02:43:09 2015: scan: opened port hw:0,0,0 in-hw-0-0-0-C-Media-CMI8738-MIDI
Sun Feb 8 02:43:09 2015: graph reorder: new port 'system:capture_1'
Sun Feb 8 02:43:09 2015: New client 'system' with PID 0
Sun Feb 8 02:43:09 2015: graph reorder: new port 'system:capture_2'
Sun Feb 8 02:43:09 2015: graph reorder: new port 'system:playback_1'
Sun Feb 8 02:43:09 2015: graph reorder: new port 'system:playback_2'
Sun Feb 8 02:43:09 2015: graph reorder: new port 'system:midi_capture_1'
Sun Feb 8 02:43:09 2015: scan: opened port hw:0,0,0 out-hw-0-0-0-C-Media-CMI8738-MIDI
Sun Feb 8 02:43:09 2015: New client 'PulseAudio JACK Sink' with PID 2025
Sun Feb 8 02:43:09 2015: Connecting 'PulseAudio JACK Sink:front-left' to 'system:playback_1'
Sun Feb 8 02:43:09 2015: Connecting 'PulseAudio JACK Sink:front-right' to 'system:playback_2'
Sun Feb 8 02:43:09 2015: New client 'PulseAudio JACK Source' with PID 2025
Sun Feb 8 02:43:09 2015: Connecting 'system:capture_1' to 'PulseAudio JACK Source:front-left'
Sun Feb 8 02:43:09 2015: Connecting 'system:capture_2' to 'PulseAudio JACK Source:front-right'
Sun Feb 8 02:43:10 2015: Saving settings to "/home/hellkiller/.config/jack/conf.xml" ...
02:43:11.841 JACK connection change.
02:43:11.846 Server configuration saved to "/home/hellkiller/.jackdrc".
02:43:11.848 Statistics reset.
02:43:11.858 Client activated.
02:43:11.892 JACK connection graph change.
Sun Feb 8 02:43:11 2015: New client 'qjackctl' with PID 7005

---

Thanx for your help!!

[xubuntu] Issues connecting with wifi, Realtek RTL8188CU USB card topic

Hello, I am fairly ignorant when it comes to Linux. I'm attempting to keep WinXP on my PC for offline programs and using Xubuntu for when I need to get online.

I'm running Xubuntu 14.04 LTS on a USB drive, but the internet is slow and very unreliable. It works great when I'm using Windows XP, but not so good when I'm in Xubuntu. Not sure if the driver Xubuntu selected is not adequate, or if there's something else going on.

When I am using Windows XP, it shows my USB Wifi as rtl8188CU in Realtek's Wireless LAN Utility.

After searching the forums, I found a post that is similar to my issue, but it looks like it's aimed at advanced users (http://ubuntuforums.org/showthread.p...hlight=rtl8188). He lost me at "Next I plugged the 8188CUs device in and ran 'lsmod' noting which modules were loaded..."

I did manage to run a few codes and put the output here to see if that helps.

If there's another post out there that provides baby steps on how to fix this for noobs like me then I'd appreciate the link. I didn't see anything like that in my search.

Thanks a bunch!

Code:

---

xubuntu@xubuntu:~$ sudo lshw
xubuntu                 
    description: Desktop Computer
    product: Vostro 220 Series ()
    vendor: Dell Inc.
    serial: FRGCWH1
    width: 32 bits
    capabilities: smbios-2.5 dmi-2.5 smp-1.4 smp
    configuration: boot=normal chassis=desktop cpus=2 uuid=44454C4C-5200-1047-8043-C6C04F574831
  *-core
      description: Motherboard
      product: 0P301D
      vendor: Dell Inc.
      physical id: 0
      version: A00
      serial: ..CN7360489L07NJ.
    *-firmware
          description: BIOS
          vendor: Dell Inc.
          physical id: 0
          version: 1.3.0
          date: 06/22/2010
          size: 64KiB
          capacity: 960KiB
          capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
    *-cpu:0
          description: CPU
          product: Intel(R) Core(TM)2 Duo CPU    E7300  @ 2.66GHz
          vendor: Intel Corp.
          physical id: 4
          bus info: cpu@0
          version: 6.7.6
          serial: 0001-0676-0000-0000-0000-0000
          slot: Socket 775
          size: 1595MHz
          capacity: 2666MHz
          width: 64 bits
          clock: 266MHz
          capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm dtherm cpufreq
          configuration: cores=2 enabledcores=2 id=0 threads=2
        *-cache:0
            description: L1 cache
            physical id: 5
            slot: L1-Cache
            size: 64KiB
            capacity: 64KiB
            capabilities: internal write-back data
        *-cache:1
            description: L2 cache
            physical id: 6
            slot: L2-Cache
            size: 3MiB
            capacity: 3MiB
            capabilities: internal write-back unified
        *-logicalcpu:0
            description: Logical CPU
            physical id: 0.1
            width: 64 bits
            capabilities: logical
        *-logicalcpu:1
            description: Logical CPU
            physical id: 0.2
            width: 64 bits
            capabilities: logical
    *-memory
          description: System Memory
          physical id: 2e
          slot: System board or motherboard
          size: 2GiB
        *-bank:0
            description: DIMM DDR2 Synchronous 800 MHz (1.2 ns)
            product: NT1GT64U88D0BY-AD
            vendor: Nanya
            physical id: 0
            serial: 7881D051
            slot: DIMM1
            size: 1GiB
            width: 64 bits
            clock: 800MHz (1.2ns)
        *-bank:1
            description: DIMM [empty]
            physical id: 1
            slot: DIMM2
        *-bank:2
            description: DIMM DDR2 Synchronous 800 MHz (1.2 ns)
            product: NT1GT64U88D0BY-AD
            vendor: Nanya
            physical id: 2
            serial: 45B25056
            slot: DIMM3
            size: 1GiB
            width: 64 bits
            clock: 800MHz (1.2ns)
        *-bank:3
            description: DIMM [empty]
            physical id: 3
            slot: DIMM4
    *-cpu:1
          physical id: 1
          bus info: cpu@1
          version: 6.7.6
          serial: 0001-0676-0000-0000-0000-0000
          size: 2662MHz
          capacity: 2662MHz
          capabilities: ht cpufreq
          configuration: id=0
        *-logicalcpu:0
            description: Logical CPU
            physical id: 0.1
            capabilities: logical
        *-logicalcpu:1
            description: Logical CPU
            physical id: 0.2
            capabilities: logical
    *-pci
          description: Host bridge
          product: 4 Series Chipset DRAM Controller
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 03
          width: 32 bits
          clock: 33MHz
          configuration: driver=agpgart-intel
          resources: irq:0
        *-display:0
            description: VGA compatible controller
            product: 4 Series Chipset Integrated Graphics Controller
            vendor: Intel Corporation
            physical id: 2
            bus info: pci@0000:00:02.0
            version: 03
            width: 64 bits
            clock: 33MHz
            capabilities: msi pm vga_controller bus_master cap_list rom
            configuration: driver=i915 latency=0
            resources: irq:44 memory:fe400000-fe7fffff memory:d0000000-dfffffff ioport:cc00(size=8)
        *-display:1 UNCLAIMED
            description: Display controller
            product: 4 Series Chipset Integrated Graphics Controller
            vendor: Intel Corporation
            physical id: 2.1
            bus info: pci@0000:00:02.1
            version: 03
            width: 64 bits
            clock: 33MHz
            capabilities: pm bus_master cap_list
            configuration: latency=0
            resources: memory:fe900000-fe9fffff
        *-usb:0
            description: USB controller
            product: 82801JI (ICH10 Family) USB UHCI Controller #4
            vendor: Intel Corporation
            physical id: 1a
            bus info: pci@0000:00:1a.0
            version: 00
            width: 32 bits
            clock: 33MHz
            capabilities: uhci bus_master cap_list
            configuration: driver=uhci_hcd latency=0
            resources: irq:16 ioport:c880(size=32)
        *-usb:1
            description: USB controller
            product: 82801JI (ICH10 Family) USB UHCI Controller #5
            vendor: Intel Corporation
            physical id: 1a.1
            bus info: pci@0000:00:1a.1
            version: 00
            width: 32 bits
            clock: 33MHz
            capabilities: uhci bus_master cap_list
            configuration: driver=uhci_hcd latency=0
            resources: irq:21 ioport:c800(size=32)
        *-usb:2
            description: USB controller
            product: 82801JI (ICH10 Family) USB UHCI Controller #6
            vendor: Intel Corporation
            physical id: 1a.2
            bus info: pci@0000:00:1a.2
            version: 00
            width: 32 bits
            clock: 33MHz
            capabilities: uhci bus_master cap_list
            configuration: driver=uhci_hcd latency=0
            resources: irq:17 ioport:c480(size=32)
        *-usb:3
            description: USB controller
            product: 82801JI (ICH10 Family) USB2 EHCI Controller #2
            vendor: Intel Corporation
            physical id: 1a.7
            bus info: pci@0000:00:1a.7
            version: 00
            width: 32 bits
            clock: 33MHz
            capabilities: pm debug ehci bus_master cap_list
            configuration: driver=ehci-pci latency=0
            resources: irq:18 memory:feafbc00-feafbfff
        *-multimedia
            description: Audio device
            product: 82801JI (ICH10 Family) HD Audio Controller
            vendor: Intel Corporation
            physical id: 1b
            bus info: pci@0000:00:1b.0
            version: 00
            width: 64 bits
            clock: 33MHz
            capabilities: pm msi pciexpress bus_master cap_list
            configuration: driver=snd_hda_intel latency=0
            resources: irq:45 memory:feaf4000-feaf7fff
        *-pci:0
            description: PCI bridge
            product: 82801JI (ICH10 Family) PCI Express Root Port 1
            vendor: Intel Corporation
            physical id: 1c
            bus info: pci@0000:00:1c.0
            version: 00
            width: 32 bits
            clock: 33MHz
            capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
            configuration: driver=pcieport
            resources: irq:40 ioport:1000(size=4096) memory:80000000-801fffff ioport:80200000(size=2097152)
        *-pci:1
            description: PCI bridge
            product: 82801JI (ICH10 Family) PCI Express Root Port 3
            vendor: Intel Corporation
            physical id: 1c.2
            bus info: pci@0000:00:1c.2
            version: 00
            width: 32 bits
            clock: 33MHz
            capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
            configuration: driver=pcieport
            resources: irq:41 ioport:d000(size=4096) memory:feb00000-febfffff ioport:fdf00000(size=1048576)
          *-network
                description: Ethernet interface
                product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
                vendor: Realtek Semiconductor Co., Ltd.
                physical id: 0
                bus info: pci@0000:02:00.0
                logical name: eth0
                version: 02
                serial: 00:21:9b:16:85:e5
                size: 10Mbit/s
                capacity: 1Gbit/s
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s
                resources: irq:43 ioport:d800(size=256) memory:febff000-febfffff memory:fdff0000-fdffffff memory:febc0000-febdffff
        *-usb:4
            description: USB controller
            product: 82801JI (ICH10 Family) USB UHCI Controller #1
            vendor: Intel Corporation
            physical id: 1d
            bus info: pci@0000:00:1d.0
            version: 00
            width: 32 bits
            clock: 33MHz
            capabilities: uhci bus_master cap_list
            configuration: driver=uhci_hcd latency=0
            resources: irq:23 ioport:c400(size=32)
        *-usb:5
            description: USB controller
            product: 82801JI (ICH10 Family) USB UHCI Controller #2
            vendor: Intel Corporation
            physical id: 1d.1
            bus info: pci@0000:00:1d.1
            version: 00
            width: 32 bits
            clock: 33MHz
            capabilities: uhci bus_master cap_list
            configuration: driver=uhci_hcd latency=0
            resources: irq:18 ioport:c080(size=32)
        *-usb:6
            description: USB controller
            product: 82801JI (ICH10 Family) USB UHCI Controller #3
            vendor: Intel Corporation
            physical id: 1d.2
            bus info: pci@0000:00:1d.2
            version: 00
            width: 32 bits
            clock: 33MHz
            capabilities: uhci bus_master cap_list
            configuration: driver=uhci_hcd latency=0
            resources: irq:18 ioport:c000(size=32)
        *-usb:7
            description: USB controller
            product: 82801JI (ICH10 Family) USB2 EHCI Controller #1
            vendor: Intel Corporation
            physical id: 1d.7
            bus info: pci@0000:00:1d.7
            version: 00
            width: 32 bits
            clock: 33MHz
            capabilities: pm debug ehci bus_master cap_list
            configuration: driver=ehci-pci latency=0
            resources: irq:23 memory:feafb800-feafbbff
        *-pci:2
            description: PCI bridge
            product: 82801 PCI Bridge
            vendor: Intel Corporation
            physical id: 1e
            bus info: pci@0000:00:1e.0
            version: 90
            width: 32 bits
            clock: 33MHz
            capabilities: pci subtractive_decode bus_master cap_list
            resources: ioport:e000(size=4096)
          *-multimedia
                description: Multimedia audio controller
                product: ICE1712 [Envy24] PCI Multi-Channel I/O Controller
                vendor: VIA Technologies Inc.
                physical id: 0
                bus info: pci@0000:03:00.0
                version: 02
                width: 32 bits
                clock: 33MHz
                capabilities: pm bus_master cap_list
                configuration: driver=snd_ice1712 latency=64
                resources: irq:21 ioport:ec00(size=32) ioport:e880(size=16) ioport:e800(size=16) ioport:e480(size=64)
        *-isa
            description: ISA bridge
            product: 82801JIR (ICH10R) LPC Interface Controller
            vendor: Intel Corporation
            physical id: 1f
            bus info: pci@0000:00:1f.0
            version: 00
            width: 32 bits
            clock: 33MHz
            capabilities: isa bus_master cap_list
            configuration: driver=lpc_ich latency=0
            resources: irq:0
        *-storage
            description: SATA controller
            product: 82801JI (ICH10 Family) SATA AHCI Controller
            vendor: Intel Corporation
            physical id: 1f.2
            bus info: pci@0000:00:1f.2
            version: 00
            width: 32 bits
            clock: 66MHz
            capabilities: storage msi pm ahci_1.0 bus_master cap_list
            configuration: driver=ahci latency=0
            resources: irq:42 ioport:bc00(size=8) ioport:b880(size=4) ioport:b800(size=8) ioport:b480(size=4) ioport:b400(size=32) memory:feafb000-feafb7ff
        *-serial UNCLAIMED
            description: SMBus
            product: 82801JI (ICH10 Family) SMBus Controller
            vendor: Intel Corporation
            physical id: 1f.3
            bus info: pci@0000:00:1f.3
            version: 00
            width: 64 bits
            clock: 33MHz
            configuration: latency=0
            resources: memory:feafac00-feafacff ioport:400(size=32)
    *-scsi:0
          physical id: 2
          logical name: scsi0
          capabilities: emulated
        *-disk
            description: ATA Disk
            product: ST3250310AS
            vendor: Seagate
            physical id: 0.0.0
            bus info: scsi@0:0.0.0
            logical name: /dev/sda
            version: 4.AD
            serial: 6RYHJJ8F
            size: 232GiB (250GB)
            capabilities: partitioned partitioned:dos
            configuration: ansiversion=5 sectorsize=512 signature=a42d04a3
          *-volume:0
                description: Windows FAT volume
                vendor: Dell 8.0
                physical id: 1
                bus info: scsi@0:0.0.0,1
                logical name: /dev/sda1
                version: FAT16
                serial: 07d8-0c1d
                size: 54MiB
                capacity: 54MiB
                capabilities: primary fat initialized
                configuration: FATs=2 filesystem=fat label=DellUtility
          *-volume:1
                description: Windows NTFS volume
                physical id: 2
                bus info: scsi@0:0.0.0,2
                logical name: /dev/sda2
                version: 3.1
                serial: 98397dcd-aea3-6045-89b9-374ebcc4e32c
                size: 232GiB
                capacity: 232GiB
                capabilities: primary bootable ntfs initialized
                configuration: clustersize=4096 created=2008-12-30 07:01:21 filesystem=ntfs label=OS state=clean
    *-scsi:1
          physical id: 3
          logical name: scsi1
          capabilities: emulated
        *-cdrom
            description: DVD-RAM writer
            product: DVD+-RW GH30N
            vendor: HL-DT-ST
            physical id: 0.0.0
            bus info: scsi@1:0.0.0
            logical name: /dev/cdrom
            logical name: /dev/sr0
            version: A102
            capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
            configuration: ansiversion=5 status=nodisc
    *-scsi:2
          physical id: 5
          logical name: scsi2
          capabilities: emulated
        *-disk
            description: ATA Disk
            product: ST31000528AS
            vendor: Seagate
            physical id: 0.0.0
            bus info: scsi@2:0.0.0
            logical name: /dev/sdb
            version: CC37
            serial: 9VP27A3K
            size: 931GiB (1TB)
            capabilities: partitioned partitioned:dos
            configuration: ansiversion=5 sectorsize=512 signature=0004e5d8
          *-volume
                description: Extended partition
                physical id: 1
                bus info: scsi@2:0.0.0,1
                logical name: /dev/sdb1
                size: 915GiB
                capacity: 915GiB
                capabilities: primary extended partitioned partitioned:extended
              *-logicalvolume:0
                  description: HPFS/NTFS partition
                  physical id: 5
                  logical name: /dev/sdb5
                  capacity: 914GiB
              *-logicalvolume:1
                  description: HPFS/NTFS partition
                  physical id: 6
                  logical name: /dev/sdb6
                  logical name: /media/xubuntu/Inspiration
                  capacity: 776MiB
                  configuration: mount.fstype=fuseblk mount.options=rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=1024 state=mounted
    *-scsi:3
          physical id: 6
          bus info: usb@2:3
          logical name: scsi6
          capabilities: emulated scsi-host
          configuration: driver=usb-storage
        *-disk
            description: SCSI Disk
            physical id: 0.0.0
            bus info: scsi@6:0.0.0
            logical name: /dev/sdc
            size: 7667MiB (8039MB)
            capabilities: partitioned partitioned:dos
            configuration: sectorsize=512 signature=c3072e18
          *-volume
                description: Windows FAT volume
                vendor: SYSLINUX
                physical id: 1
                bus info: scsi@6:0.0.0,1
                logical name: /dev/sdc1
                logical name: /cdrom
                version: FAT32
                serial: aa46-a754
                size: 7665MiB
                capacity: 7666MiB
                capabilities: primary bootable fat initialized
                configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted
  *-network
      description: Wireless interface
      physical id: 1
      bus info: usb@2:2
      logical name: wlan0
      serial: 00:23:13:03:08:d2
      capabilities: ethernet physical wireless
      configuration: broadcast=yes driver=rtl8192cu driverversion=3.13.0-32-generic firmware=N/A ip=192.168.1.6 link=yes multicast=yes wireless=IEEE 802.11bgn

---

************************
Code: lspci -nn | grep 0280
Result: nothing

***********************************
Code:

wget -N -t 5 -T 10 http://dl.dropbox.com/u/57264241/wireless_script && chmod +x wireless_script && ./wireless_script

Result:
Resolving dl.dropbox.com (dl.dropbox.com)... failed: Connection timed out.
wget: unable to resolve host address ‘dl.dropbox.com’
xubuntu@xubuntu:~$
************************************

Code:

---

xubuntu@xubuntu:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:21:9b:16:85:e5 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:210 errors:0 dropped:0 overruns:0 frame:0
          TX packets:210 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:15601 (15.6 KB)  TX bytes:15601 (15.6 KB)

wlan0    Link encap:Ethernet  HWaddr 00:23:13:03:08:d2 
          inet addr:192.168.1.6  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::223:13ff:fe03:8d2/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:114 errors:0 dropped:0 overruns:0 frame:0
          TX packets:201 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:56138 (56.1 KB)  TX bytes:28667 (28.6 KB)

---

**********************************************
Usage: ping [-aAbBdDfhLnOqrRUvV] [-c count] [-i interval] [-I interface]
[-m mark] [-M pmtudisc_option] [-l preload] [-p pattern] [-Q tos]
[-s packetsize] [-S sndbuf] [-t ttl] [-T timestamp_option]
[-w deadline] [-W timeout] [hop1 ...] destination

************************************************

Code:

---

xubuntu@xubuntu:~$ sudo lshw -C network
  *-network             
      description: Ethernet interface
      product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
      vendor: Realtek Semiconductor Co., Ltd.
      physical id: 0
      bus info: pci@0000:02:00.0
      logical name: eth0
      version: 02
      serial: 00:21:9b:16:85:e5
      size: 10Mbit/s
      capacity: 1Gbit/s
      width: 64 bits
      clock: 33MHz
      capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
      configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s
      resources: irq:43 ioport:d800(size=256) memory:febff000-febfffff memory:fdff0000-fdffffff memory:febc0000-febdffff
  *-network
      description: Wireless interface
      physical id: 1
      bus info: usb@2:2
      logical name: wlan0
      serial: 00:23:13:03:08:d2
      capabilities: ethernet physical wireless
      configuration: broadcast=yes driver=rtl8192cu driverversion=3.13.0-32-generic firmware=N/A ip=192.168.1.6 link=yes multicast=yes wireless=IEEE 802.11bgn

---

RAID5 recovery issues topic

Home server running Ubuntu Server edition went down last weekend. Power supply failure.

After installing a new power supply and reboot, I noticed I lost my RAID5 array (4x 1TB drives). Upon closer inspection, I noticed that two of the drives showed faulty. Checking the drives individually the drives did not appear to be faulty.

Admittedly, I am rusty working with RAID arrays. I don't use linux much any more at work and this is my home setup. I'm perfectly good at searching all over Google-dom, as I have, but it appears I may have made some mistakes here so this is my last ditch effort to find a solution for data recovery. Thankfully the *most* important data that was on the array was backed up, but half of it (non-critical but would like to have back) was not.

So when I went to re-mount the RAID array, it no longer existed.

I used mdadm to examine the drives, here is what I found:



As I checked two of the other drives, they claimed that two of the disks in the middle (/dev/sdc1 and /dev/sda1) were faulty.

I searched and searched. Ultimately I went with trying to re-assemble the array with the following command:

Code:

---

sudo mdadm --create /dev/md0 -v -l 5 -n 4 /dev/sd[bcae]1

---

It then rebuilt the array. I should mention that while I re-installed the power supply, I had to unplug some of the SATA cords and reinstall them. They may have not been re-connected in the same original order. However, I assumed that mdadm was smart enough to recognize which drives went in which order. Maybe I was wrong? Anyhow, after I ran my command, I noticed that mdadm began assembling the array in a different order than I prescribed in the command.

I got this:



Since it took a while to rebuild, I went to bed. Then, the next morning I woke up and tried to see if I could remount the drive. No luck. No filesystem found (should have been ext4). Tried running fsck but nothing was found. Also tried e2fsck, etc.

Then I remembered something. I vaguely remembered when building the array several years ago (yes this array has been running for several years with no failures) that I think I might have used 128k chunk sizes. I noticed the newly re-assembled array was 64k.

Now I have the sinking feeling that I may have hosed the array. At any rate, I'm lost and don't know what else can be done, if anything.

Thanks to anyone who might be able to help!

[ubuntu] VPN Issues topic

Greetings:

I have a site to site VPN setup between my primary location, and an off-site location using OpenSwan. Traffic from here to there seems to work fine for a Windows 2003R2 server, and a CentOS guest that work just fine. I can SSH from the CentOS server to an Ubuntu 12.04 server on my "local" network no problem.

I am running into issues with connecting anything TCP based from my local network to Ubuntu 12.04 servers on the remote network. These seem to be the only servers I have issues with.

I can ping the servers no problem, even with large packets.

I cannot do anything involving TCP to them from my local site. If I am on one of the CentOS guests on the remote site, I have no issue connecting to the Ubuntu servers through SSH or any other TCP protocol.

I'm really stumped! I would appreciate any help anyone can offer.

Thanks in advance,
Richard

[UbuntuGnome] UEFI dual-boot grub/boot menu issues topic

Probably not the best title but bear with me while I explain what's going on. I was recently gifted an Intel DB43LD mobo to perform UEFI dual/multi-boot iso-testing. It's a bit long-in-the-tooth (circa 2009) but it'll suffice until I can afford something newer.

So I started by installing Windows 8.1 Enterprise edition in UEFI mode on a GPT formatted drive:

start_point_comp.jpg

I then installed Ubuntu GNOME Trusty in UEFI mode (or at least I think I did based on the live boot menu appearance - black background with white print):

Gpart_dual_boot.jpg

But when I rebooted the box it went right into Windows without displaying any grub menu. I knew though from browsing the BIOS settings previously that pressing F10 would display a boot menu which is a new trick for me so I looked at that boot menu (sadly I didn't think of snapping a pic) but Ubuntu was NOT shown there either.

Next I decided to run Boot Repair using the Trusty live DVD and I was smart enough to grab a boot info summary before trying an actual repair:

http://paste.ubuntu.com/10048056/

I then ran Boot Repair which did end up working (at least partly) and I grabbed another post-repair boot info summary:

http://paste.ubuntu.com/10048113/

Sadly the box still booted straight into Windows but I rebooted again and pressed F10 to display the BIOS boot menu and Ubuntu was now there:

boot_menu.JPG

And if I select Ubuntu the GRUB menu appears and it will boot either Ubuntu GNOME or Windows:

grub_menu.JPG

So it's at least partly fixed but I'd like it to boot Ubuntu Gnome without having to hit F10 and selecting Ubuntu from the BIOS boot menu. Is that possible?

More importantly what went wrong? I thought after several hours of browsing and reading that it was this bug:

https://bugs.launchpad.net/ubuntu/+s...y/+bug/1050940

But shortly after commenting there and reporting it on the QA iso testing tracker it was marked as a duplicate and I now have serious doubts. So I'm a bit lost.

Any help would be appreciated. I'm sure I'll have many more questions as I try to learn the whole UEFI process.

Attached Images

• 
  
  start_point_comp.jpg
  (49.9 KB)
  
• 
  
  Gpart_dual_boot.jpg
  (57.4 KB)
  
• 
  
  boot_menu.JPG
  (224.2 KB)
  
• 
  
  grub_menu.JPG
  (290.9 KB)
  

[ubuntu] Rosewill RNX-AC1200UBE2 Driver Issues topic

Hey everyone!

I'm don't usually find myself posting to ask for help, but I've put quite a few hours into this problem with no progress.
I'm also not the most experienced with Linux based operating systems, so please bear with me, and explain things like I only have rudimentary knowledge of the terminal.

I have a Rosewill RNX-AC1200UBE2 wireless adapter that is not recognized when plugged into any USB port on my computer. I tried downloading and installing the drivers on the Rosewill site, but the Makefile always fails with several errors. I am running Ubuntu 14.10, and my kernel is 3.16.0-30-generic. Any help would be appreciated, and I'll be here to answer any question that can help.

[ubuntu] Firewire stability issues with Ubuntu on Mac Mini mid 2007 (sbp2_scsi_abort) topic

Hi!

I am new on this forum but not completely new with Linux. I was playing around with Ubuntu years ago. Loved it but ended up going Apple instead. Just recently re-discovered Linux when I realized I need a home server for files, backups, media etc... Took a few days of research and reading but now I got the server up and running the way I planned, and I'm simply having a blast with Linux :).

However, I have an issue with my Firewire interface. A quite serious issue, and to my big surprise, Google doesn't seem to have the answer this time :O.

My Mac Mini has a few USB 2.0 ports and a Firewire 400 port, so I obviously want to connect all my hard drives to the Firewire port. This works fine at first, but after some time the drives just "disappears", resulting in obvious /IO errors.

I have tried with two different enclosures - same thing. However, connecting only ONE drive seems to work OK. But once I connect another drive, and do some copying between them, either one of them, or both, will "disappear" eventually. I have not found a way yet to restart the firewire bus, so what I do is simply unmount both drives, turn off the power, turn them back on and re-mount them. If I connect the drives via USB instead they run for days without any problems at all.

Since this problem occurs with all the Firewire equipment I currently can test with I suppose there is something on the Mac Mini that's causing problems, or perhaps the 1394 driver in Linux.

I would truly appreciate some help on what to do next here! My setup is kind of useless without Firewire capabilities - running all my drives on USB 2.0 sounds like a nightmare :D.

Some info :

Code:

---

$ cat /proc/version
Linux version 3.13.0-24-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014

---

Code:

---

$ lsmod | grep -e 1394 -e firewire
firewire_sbp2          22665  1
firewire_ohci          40409  0
firewire_core          68769  2 firewire_ohci,firewire_sbp2
crc_itu_t              12707  1 firewire_core

---

Code:

---

$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:07.0 Performance counters: Intel Corporation Device 27a3 (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 22)
02:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
03:03.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 61)

---

And today's syslog for everything regarding Firewire (I think...). The key seems to be the "sbp2_scsi_abort" as it always appears when I get this error (only happened one time today though).

Code:

---

$ cat /var/log/syslog | grep -e 1394 -e firewire
Feb  5 10:51:46 UBServer64bit kernel: [53182.728435] firewire_core 0000:03:03.0: phy config: new root=ffc1, gap_count=5
Feb  5 10:51:49 UBServer64bit kernel: [53185.935303] firewire_core 0000:03:03.0: phy config: new root=ffc1, gap_count=5
Feb  5 10:51:49 UBServer64bit kernel: [53186.247026] scsi23 : SBP-2 IEEE-1394
Feb  5 10:51:49 UBServer64bit kernel: [53186.247143] firewire_core 0000:03:03.0: created device fw1: GUID 0030e101e0020275, S400
Feb  5 10:51:50 UBServer64bit kernel: [53186.477397] firewire_sbp2 fw1.0: logged in to LUN 0000 (0 retries)
Feb  5 11:22:44 UBServer64bit kernel: [55041.293738] firewire_core 0000:03:03.0: phy config: new root=ffc1, gap_count=5
Feb  5 11:22:45 UBServer64bit kernel: [55041.792069] firewire_core 0000:03:03.0: giving up on node ffc2: reading config rom failed: bus reset
Feb  5 11:22:46 UBServer64bit kernel: [55042.632094] firewire_core 0000:03:03.0: rediscovered device fw0
Feb  5 11:22:46 UBServer64bit kernel: [55042.632230] firewire_core 0000:03:03.0: giving up on node ffc0: reading config rom failed: bus reset
Feb  5 11:22:46 UBServer64bit kernel: [55042.632263] firewire_core 0000:03:03.0: phy config: new root=ffc1, gap_count=5
Feb  5 11:22:46 UBServer64bit kernel: [55043.292063] firewire_sbp2 fw1.0: ORB reply timed out, rcode 0x11
Feb  5 11:22:48 UBServer64bit kernel: [55045.292050] firewire_sbp2 fw1.0: ORB reply timed out, rcode 0x11
Feb  5 11:22:51 UBServer64bit kernel: [55047.492053] firewire_sbp2 fw1.0: ORB reply timed out, rcode 0x11
Feb  5 11:22:51 UBServer64bit kernel: [55047.591578] Modules linked in: iptable_filter ip_tables x_tables nls_utf8 hfsplus firewire_sbp2 arc4 ath5k coretemp hid_apple hid_appleir ath applesmc kvm_intel hid_generic mac80211 kvm i915 cfg80211 input_polldev drm_kms_helper snd_hda_codec_idt drm snd_hda_intel usbhid snd_hda_codec i2c_algo_bit snd_hwdep lpc_ich hid snd_pcm snd_page_alloc snd_timer snd soundcore video mac_hid lp parport usb_storage firewire_ohci firewire_core crc_itu_t sky2
Feb  5 11:22:51 UBServer64bit kernel: [55047.955772] scsi26 : SBP-2 IEEE-1394
Feb  5 11:22:51 UBServer64bit kernel: [55047.955891] firewire_core 0000:03:03.0: created device fw2: GUID 0030e101e0020275, S400
Feb  5 11:22:51 UBServer64bit kernel: [55048.000239] firewire_sbp2 fw1.0: released target 23:0:0
Feb  5 11:22:51 UBServer64bit kernel: [55048.185204] firewire_sbp2 fw2.0: logged in to LUN 0000 (0 retries)
Feb  5 11:24:56 UBServer64bit kernel: [55173.216101] firewire_core 0000:03:03.0: rediscovered device fw0
Feb  5 11:24:56 UBServer64bit kernel: [55173.216147] firewire_core 0000:03:03.0: phy config: new root=ffc1, gap_count=5
Feb  5 11:25:00 UBServer64bit kernel: [55176.780202] firewire_sbp2 fw2.0: released target 26:0:0
Feb  5 11:25:01 UBServer64bit kernel: [55178.237963] scsi27 : SBP-2 IEEE-1394
Feb  5 11:25:01 UBServer64bit kernel: [55178.238098] firewire_core 0000:03:03.0: created device fw1: GUID 0030e101e0020275, S400
Feb  5 11:25:02 UBServer64bit kernel: [55178.470724] firewire_sbp2 fw1.0: logged in to LUN 0000 (0 retries)
Feb  5 11:25:21 UBServer64bit kernel: [55198.160200] firewire_sbp2 fw1.0: released target 27:0:0
Feb  5 11:26:04 UBServer64bit kernel: [55240.556075] firewire_core 0000:03:03.0: rediscovered device fw0
Feb  5 11:26:47 UBServer64bit kernel: [55284.164100] firewire_core 0000:03:03.0: rediscovered device fw0
Feb  5 11:29:22 UBServer64bit kernel: [55439.370596] firewire_core 0000:03:03.0: BM lock failed (busy), making local node (ffc0) root
Feb  5 11:29:22 UBServer64bit kernel: [55439.370604] firewire_core 0000:03:03.0: phy config: new root=ffc0, gap_count=5
Feb  5 11:29:26 UBServer64bit kernel: [55442.522660] firewire_core 0000:03:03.0: phy config: new root=ffc1, gap_count=5
Feb  5 11:29:26 UBServer64bit kernel: [55442.886520] scsi29 : SBP-2 IEEE-1394
Feb  5 11:29:26 UBServer64bit kernel: [55442.886664] firewire_core 0000:03:03.0: created device fw1: GUID 0030e101e0020275, S400
Feb  5 11:29:26 UBServer64bit kernel: [55443.119248] firewire_sbp2 fw1.0: logged in to LUN 0000 (0 retries)
Feb  5 11:50:02 UBServer64bit kernel: [56678.916213] firewire_sbp2 fw1.0: released target 29:0:0
Feb  5 11:51:10 UBServer64bit kernel: [56746.404363] firewire_core 0000:03:03.0: phy config: new root=ffc1, gap_count=5
Feb  5 11:51:10 UBServer64bit kernel: [56746.904065] firewire_core 0000:03:03.0: giving up on node ffc0: reading config rom failed: bus reset
Feb  5 11:51:20 UBServer64bit kernel: [56756.682529] firewire_core 0000:03:03.0: phy config: new root=ffc1, gap_count=5
Feb  5 11:51:27 UBServer64bit kernel: [56763.845124] firewire_core 0000:03:03.0: phy config: new root=ffc1, gap_count=5
Feb  5 11:51:27 UBServer64bit kernel: [56764.233376] scsi31 : SBP-2 IEEE-1394
Feb  5 11:51:27 UBServer64bit kernel: [56764.233493] firewire_sbp2 fw1.0: workarounds 0x20 (firmware_revision 0x012804, model_id 0x000001)
Feb  5 11:51:27 UBServer64bit kernel: [56764.233511] firewire_core 0000:03:03.0: created device fw1: GUID 00d0b80e013150de, S400
Feb  5 11:51:28 UBServer64bit kernel: [56764.432764] firewire_sbp2 fw1.0: logged in to LUN 0000 (0 retries)
Feb  5 11:51:31 UBServer64bit kernel: [56768.403711] firewire_core 0000:03:03.0: phy config: new root=ffc2, gap_count=7
Feb  5 11:51:32 UBServer64bit kernel: [56768.901507] firewire_sbp2 fw1.0: reconnected to LUN 0000 (0 retries)
Feb  5 11:51:35 UBServer64bit kernel: [56771.910368] firewire_core 0000:03:03.0: phy config: new root=ffc2, gap_count=7
Feb  5 11:51:35 UBServer64bit kernel: [56771.910790] firewire_sbp2 fw1.0: reconnected to LUN 0000 (0 retries)
Feb  5 11:51:35 UBServer64bit kernel: [56771.911219] firewire_sbp2 fw1.0: reconnected to LUN 0000 (0 retries)
Feb  5 11:51:35 UBServer64bit kernel: [56772.230946] scsi32 : SBP-2 IEEE-1394
Feb  5 11:51:35 UBServer64bit kernel: [56772.231076] firewire_core 0000:03:03.0: created device fw2: GUID 0030e101e0020275, S400
Feb  5 11:51:36 UBServer64bit kernel: [56772.446297] firewire_sbp2 fw2.0: logged in to LUN 0000 (0 retries)
Feb  5 12:25:23 UBServer64bit kernel: [58799.836074] firewire_sbp2 fw1.0: sbp2_scsi_abort
Feb  5 12:25:33 UBServer64bit kernel: [58809.836039] firewire_sbp2 fw1.0: sbp2_scsi_abort
Feb  5 12:25:43 UBServer64bit kernel: [58820.113942] sd 31:0:0:0: rejecting I/O to offline device
Feb  5 12:25:44 UBServer64bit kernel: [58821.113945] sd 31:0:0:0: rejecting I/O to offline device
Feb  5 12:25:46 UBServer64bit kernel: [58823.013949] sd 31:0:0:0: rejecting I/O to offline device

---

Happy to provide any additional info if needed - just let me know!

A million thanks in advance :)

Best regards

Peter